Store

This Sunforce Products ProSeries solar backup power system gives you up to 1300 Watts of power, making it an ideal choice for powering up non-electrified cabins and cottages or storing emergency power. Application: Backup Power, Watts: 1300, Dimensions L x W x H (in.): (10) 59 x 26 3/4 x 2 3/4 panels, Material: Polycrystalline Sharp Modules, Panel Type: Polycrystalline, Panels (qty.): 10, Battery Type: None; min. 600 Ah battery recommended, Battery Included: No Includes ten 130 Watt Sharp module panels; panels are 59in.L x 26 3/4in.W x 2 3/4in.H each 2500 Watt pure sine wave inverter for all types of appliances and sensitive electronics Two 50 Amp charge controllers; controllers are PWM and temperature compensating Minimum 600 Ah battery recommended; battery not included

Harness the power of the sun to generate your electricity and provide security during power outages. The BPS-3600-S solar package is engineered to allow you to create and use your own energy to power household appliances. Plus, each unit acts as an ultra-quiet emergency backup system that monitors your utility companys electric power 24/7. Add another 4 solar panels (Item# 462001, sold separately) and create your own energy to power household appliances. U.S.A. Requires a licensed electrician to install and wire into existing utility panel Application: Household appliances, Watts: 3600 running watts/7500 surge watts for up to 15 seconds, LED Light: Front panel, Material: Photovoltaic panel, Panels (qty.): 4, Battery Type: 220ah High capacity, Battery Included: Yes In the event of a power outage, the built-in automatic transfer switch provides backup emergency power and recharges with the power of the sun; no additional transfer switch required unless using in conjunction with a generator Converts 24V DC to 120V AC @ 60 Hz 3-stage battery charger Quality modified sine wave output Front panel LEDs for continuous status information Charges batteries with solar power, utility power or standby generator 4 photovoltaic panel units (solar panels)

The SolarSheat® Hot Water System is an innovative dual mode solar air space heating system for the winter and a supplemental solar domestic hot water system in the summer. The SolarSheat uses household water and does not require glycol or other additives. The system uses automatic dampers and can switch between heating and hot water modes quickly. It can be installed with a roof mount, a standard- or below-grade wall mount Ductwork not included The SolarSheat should be installed by a licensed professional Maximum 10,000 BTU/hour

Ultra-quiet extended run standby power system is capable of 110V and/or 220V, 60 Amp output or 220V. Seamlessly transfers home or business electrical needs to the battery bank/inverter system during power outages. Delivers an instantaneous (4-6ms) transfer of power to support critical appliances and most computers for up to 144 hours (110V) or up to 72 hours (220V) (actual time dependent on wattage demand). Features long-lasting maintenance free AGM (Absorbed Glass Mat) batteries. When utility power is restored and stable, the BPS220D Flex-AG automatically switches back to utility power and recharges the battery bank. Also acts as a surge protector between grid power and appliances. Integrated inverter/charger also does not allow backfeeding to the utility power grid. Standby system is also capable of collecting power from alternative sources (solar arrays, wind turbines and power generators) for recharging. Delivers 30 Amps of 120V power. 2-year limited warranty requires a licensed electrician for installation and wiring. U.S.A. Standby Unit: Yes, Running Watts: 3,600, Amps: 60 / 30, Surge Watts: 7,500, Power (Volts): 220V / 110V, Run Time (hrs.): 144 / 72, Flex Standby: Yes, Battery Type: Absorbed Glass Mat, Battery Qty.: 8, Rechargable Battery Bank: Yes, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Allows Backfeeding of Power: No, Works With Gas Generator: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 40 x 36 x 53, Electrician Required: Yes 8 maintenance free AGM batteries 30 Amps @ 110V Can safely power appliances and computers Ultra-quiet operation Can connect Sentinel to gas generator to recharge batteries during extended outages Can be installed anywhere in home Can also be used with solar power (requires solar regulator and solar panel) We recommend the use of a trained professional for electric connections. If used with a generator we recommend the installation of a transfer switch.

Harness the power of the sun to generate your electricity and provide security during power outages. The 3600WC Solar 2PV solar package is engineered to allow you to create and use your own energy to power household appliances. Plus, each unit acts as an ultra-quiet emergency backup system that monitors your utility companys electric power 24/7. Add another 2 solar panels (Item# 462002, sold separately) and create your own energy to power household appliances. U.S.A. Requires a licensed electrician to install and wire into existing utility panel Application: Household appliances, Watts: 3600 running watts/7500 surge watts for up to 15 seconds, Panel Type: Photovoltaic panel, Panels (qty.): 2, Battery Type: 220ah high capacity, Battery Included: Yes In the event of a power outage, the built-in automatic transfer switch provides backup emergency power and recharges with the power of the sun; no additional transfer switch required unless using in conjunction with a generator Energy is stored in 4 powerful 220Ah high-capacity specialized batteries Converts 24V DC to 120V AC @ 60 Hz 3-stage battery charger Quality modified sine wave output Front panel LEDs for continuous status information Charges batteries with solar power, utility power or standby generator 2 photovoltaic panel units (solar panels)

This Sunforce Products solar backup power system delivers up to 800 Watts of power, making it an ideal choice for powering up non-electrified cabins and cottages or storing emergency power. Application: Backup Power, Watts: 800, Dimensions L x W x H (in.): (10) 51 1/4 x 25 7/8 x 3 1/2 panels, Material: Polycrystalline Sharp Modules, Panel Type: Polycrystalline, Panels (qty.): 10, Battery Type: None; min. 350 Ah battery recommended, Battery Included: No Includes ten 80 Watt Sharp module panels; panels are 51 1/4in.L x 26 7/8in.W x 3 1/2in.H each 2500 Watt pure sine wave inverter for all types of appliances and sensitive electronics 50 Amp charge controller; controller is PWM and temperature compensating Minimum 350 Ah battery recommended; battery not included

Capable of 110V and/or 220V, 60 Amp output or 220V. Seamlessly transfers home or business electrical needs to the battery bank/inverter system during power outages. Delivers an instantaneous (4-6ms) transfer of of power to support critical appliances and most computers for up to 144 hours (110V) or up to 72 hours (220V) (actual time dependent on wattage demand). When utility power is restored and stable, the BPS220D Flex-WC automatically switches back to utility power and recharges the battery bank. Also acts as a surge protector between grid power and appliances. Integrated inverter/charger also does not allow backfeeding to the utility power grid. Standby system is also capable of collecting power from alternative sources (solar arrays, wind turbines and power generators) for recharging. Delivers 30 Amps of 120V power. 2-year limited warranty requires a licensed electrician for installation and wiring. U.S.A. Standby Unit: Yes, Running Watts: 3,600, Amps: 60 / 30, Surge Watts: 7,500, Power (Volts): 220V / 110V, Run Time (hrs.): 144 / 72, Flex Standby: Yes, Battery Type: Wet Cell, Battery Qty.: 8, Rechargable Battery Bank: Yes, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Allows Backfeeding of Power: No, Works With Gas Generator: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 40 x 36 x 53, Electrician Required: Yes 30 Amps @ 110V Can safely power appliances and computers Ultra-quiet operation Can connect Sentinel to gas generator to recharge batteries during extended outages Can be installed anywhere in home Can also be used with solar power (requires solar regulator and solar panel) We recommend the use of a trained professional for electric connections. If used with a generator we recommend the installation of a transfer switch.

Ultra-quiet extended run standby power system seamlessly transfers home or business electrical needs to the battery bank/inverter system during power outages. Delivers an instantaneous (4-6ms) transfer of power to support critical appliances and most computers for up to 144 hours (actual time dependent on wattage demand). Features long-lasting maintenance free AGM (Absorbed Glass Mat) batteries. When utility power is restored and stable, the BPS3600-8AG automatically switches back to utility power and recharges the battery bank. Also acts as a surge protector between grid power and appliances. Integrated inverter/charger also does not allow backfeeding to the utility power grid. Standby system is also capable of collecting power from alternative sources (solar arrays, wind turbines and power generators) for recharging. Delivers 30 Amps of 120V power. 2-year limited warranty requires a licensed electrician for installation and wiring. U.S.A. Standby Unit: Yes, Running Watts: 3,600, Amps: 30, Surge Watts: 7,500, Power (Volts): 120, Run Time (hrs.): 144, Extended Run: Yes, Battery Type: Absorbed Glass Mat, Battery Qty.: 8, Rechargable Battery Bank: Yes, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Allows Backfeeding of Power: No, Works With Gas Generator: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 41 1/2 x 36 x 32, Electrician Required: Yes long-lasting maintenance free AGM batteries 30 Amps @ 120V Can safely power appliances and computers Ultra-quiet operation Can connect Sentinel to gas generator to recharge batteries during extended outages Can be installed anywhere in home Can also be used with solar power (requires solar regulator and solar panel) We recommend the use of a trained professional for electric connections. If used with a generator we recommend the installation of a transfer switch.

Harness the power of the sun to generate your electricity and provide security during power outages. Add another 4 solar panels to the BPS 3600WC Solar 4PV solar package and create your own energy to power household appliances. Plus, each unit acts as an ultra-quiet emergency backup system that monitors your utility companys electric power 24/7. U.S.A. Plug & Play — no installation of power system required. Application: Add on, Panels (qty.): 4 Includes all the components to make the 24 Volt BPS-3600-S system capable of creating power from the sun

Harness the power of the sun to generate your electricity and provide security during power outages. The BPS-1250-S solar package is engineered to allow you to create and use your own energy to power household appliances. Plus, each unit acts as an ultra-quiet emergency backup system that monitors your utility companys electric power 24/7. U.S.A. Plug & Play — no installation of power system required. Application: Household appliances, Watts: 1250 running watts; 1875 watts for up to 15 seconds; 2500 surge watts for up to 10 seconds, LED Light: 6, Material: 120 Watt photovoltaic panel, Panels (qty.): 2, Battery Type: 220Ah batteries, Battery Included: Yes In the event of a power outage, the built-in automatic transfer switch provides backup emergency power and recharges with the power of the sun; no additional transfer switch required unless using in conjunction with a generator Energy is stored in 2 powerful 220Ah batteries, then converted to AC electricity by the systems inverter charger Converts 12V DC to 120V AC @ 60 Hz Battery charge rate 3-stage, 30 Amp battery charger Quality modified sine wave output 6 LEDs for continuous status information 2 NEMA 5-15R output 110 AC receptacles Charges batteries with solar or utility power Two 120 Watt photovoltaic panel units (solar panels)

Ultra-quiet extended run standby power system seamlessly transfers home or business electrical needs to the battery bank/inverter system during power outages. Delivers an instantaneous (4-6ms) transfer of power to support critical appliances and most computers for up to 144 hours (actual time dependent on wattage demand). When utility power is restored and stable, the BPS3600-8WC automatically switches back to utility power and recharges the battery bank. Also acts as a surge protector between grid power and appliances. Integrated inverter/charger also does not allow backfeeding to the utility power grid. Standby system is also capable of collecting power from alternative sources (solar arrays, wind turbines and power generators) for recharging. Delivers 30 Amps of 120V power. 2-year limited warranty requires a licensed electrician for installation and wiring. U.S.A. Standby Unit: Yes, Running Watts: 3,600, Amps: 30, Surge Watts: 7,500, Power (Volts): 120, Run Time (hrs.): 144, Extended Run: Yes, Battery Type: Wet Cell, Battery Qty.: 8, Rechargable Battery Bank: Yes, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Allows Backfeeding of Power: No, Works With Gas Generator: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 41 1/2 x 36 x 32, Electrician Required: Yes 30 Amps @ 120V Can safely power appliances and computers Ultra-quiet operation Can connect Sentinel to gas generator to recharge batteries during extended outages Can be installed anywhere in home Can also be used with solar power (requires solar regulator and solar panel) We recommend the use of a trained professional for electric connections. If used with a generator we recommend the installation of a transfer switch.

Ultra-quiet standby power system seamlessly transfers home or business electrical needs to the battery bank/inverter system during power outages. Delivers an instantaneous (4-6ms) transfer of of power to support critical appliances and most computers for up to 72 hours (actual time dependent on wattage demand). Unit features longer lasting, maintenance free AGM (Absorbed Glass Mat) batteries. When utility power is restored and stable, the BPS3600AG automatically switches back to utility power and recharges the battery bank. Also acts as a surge protector between grid power and appliances. Integrated inverter/charger also does not allow backfeeding to the utility power grid. Standby system is also capable of collecting power from alternative sources (solar arrays, wind turbines and power generators) for recharging. Delivers 30 Amps of 120V power. 2-year limited warranty requires a licensed electrician for installation and wiring. U.S.A. Standby Unit: Yes, Running Watts: 3,600, Amps: 30, Surge Watts: 7,500, Power (Volts): 120, Run Time (hrs.): 72, Battery Type: Absorbed Glass Mat, Battery Qty.: 4, Rechargable Battery Bank: Yes, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Allows Backfeeding of Power: No, Works With Gas Generator: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 41 1/2 x 36 x 15, Electrician Required: Yes 4 long-lasting maintenance free AGM batteries 30 Amps @ 120V Can safely power appliances and computers Ultra-quiet operation Can connect Sentinel to gas generator to recharge batteries during extended outages Can be installed anywhere in home Can also be used with solar power (requires solar regulator and solar panel) We recommend the use of a trained professional for electric connections. If used with a generator we recommend the installation of a transfer switch.